Pro-Form CROSSWALK 8.0 User Manual download pdf (Page 6)

6

1.

R

emove the four screws and the four shipping

brackets attached to the Frame (1). Discard the

screws and the shipping brackets.

Then, tighten four Leveling Feet (52) into the

underside of the Frame (1).

2. Identify the Frame Cover (54) and orient it as

shown. Press the Frame Cover posts into the

holes in the Frame (1).

Identify the Upright (2) and orient it as shown.

While a second person holds the Upright near

the Frame (1), connect the Upper Wire Harness

(81) to the Lower Wire Harness (82).

Tip: Avoiding pinching the Wire Harnesses

(81, 82). Insert the Upright (2) into the Frame

(1). Attach the Upright with four M10 x 19mm

Patch Screws (61) and four M10 Split Washers

(79). Do not tighten the Patch Screws yet.

1

2

52

1

1

Shipping Bracket

Screw

79

79

61

Holes

2

61

54

82

81

Avoid pinching

the wires

To make assembly easier, read the

i

nformation on page 5 before you begin.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments