Pro-Form CROSSWALK MX User Manual download pdf (Page 5)

Note: The underside of the treadmill walking belt is coated

with high-performance lubricant. During shipping, a small

amount of lubricant may be transferred to the top of the walk-

ing belt or the shipping carton. This is a normal condition and

does not affect treadmill performance. If there is lubricant on

top of the walking belt, simply wipe off the lubricant with a soft

cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the

Uprights (14), the Right Handrail (32), and the Console Base

(6) until the treadmill is in the position shown. Be careful not

to pull on the Wire Harness (26). Set the Right Handrail on

the right Upright until step 2 is completed.

Refer to the inset drawing. Insert one of the Extension

Legs (41) into the treadmill as shown. (Note: It may be

helpful to tip the Uprights [14] in the direction shown by the

arrow as you insert the Extension Leg.) Make sure that the

Base Pad (36) is on the bottom of the Extension Leg.

Attach the Extension Leg with an Extension Leg Screw

(34). Be sure to push on the head of the Extension Leg

Screw while tightening it.

Attach the other Extension Leg (41) in the same way.

2. Position the Left Handrail (2) on the left Upright (14) as

shown. Thread a Handrail Bolt (15) with a Handrail Washer

(16) into the left Upright and the Left Handrail. Do not

tighten the Handrail Bolt yet.

Attach the lower end of the Left Handrail (2) to the

Extension Leg (41) with a 3 1/2Ó Handrail Bolt (89), a 3/8Ó

Washer (70), and a Handrail Nut (57). Do not tighten the

Handrail Bolt yet.

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small

parts used in assembly. Assembly requires the included allen wrench and your own phillips screw-

driver , adjustable wrench , open end wrench and scissors .

3 1/2" Handrail Bolt (89)Ð2

Handrail Washer (16)Ð2

3/8" Washer (70)Ð2

3/4" Screw (13)Ð2

Handrail Bolt (15)Ð2

Handrail Nut (57)Ð2

Extension Leg Screw (34)Ð2

Console Screw (94)Ð4

1 2 3 4 5 6 7 8 9 10 ... 17 18

No comments

Pro-Form CROSSWALK MX User Manual Page 5