Pro-Form PERFORMANCE 400 User Manual download pdf (Page 8)

4. Hold the Right Upright (85) against the Base

(95). Be careful not to pinch the Upright

Wire (87). Insert two 3/8" x 4" Bolts (7) with two

3/8" Star Washers (11) and a 3/8" x 1 1/2" Bolt

(14) with a 3/8" Star Washer (11) into the Right

Upright.

Partially tighten the 3/8" x 4" Bolts (7) until the

heads of the Bolts touch the Right Upright (85);

do not fully tighten the Bolts yet. Partially

tighten the 3/8" x 1 1/2" Bolt (14).

3. Identify the Right Upright (85), which is marked

ith a “Right” sticker. Hold the Right Upright

near the Base (95) as shown.

See the inset drawing. Tie the wire tie in the

Right Upright (85) securely around the end of

the Upright Wire (87). Then, pull the other end

f the wire tie until the Upright Wire is routed

completely through the Right Upright.

Wire Tie

Wire

Tie

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

Pro-Form PERFORMANCE 400 User Manual Page 8