Pro-Form 415 CT User Manual

Serial NumberDecalModel No. PFTL49611.0Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions

109. Slide the Right Upright Cover (86) onto theRight Upright (85). Remove the tie from the5/16" Cage Nut (38). If necessary, press theCage Nut b

1112. Firmly tighten the two 5/16" x 1" Bolts (4) andthe four 5/16" x 1" Flat Head Screws (14) (onlyone side is shown).With the he

1214. Hold the Right Upright Cover (86) against theconsole assembly. Align the holes in the RightUpright Cover with the holes in the Right Upright(85)

1317. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plasticon the treadmill decals, remove the

14OPERATION AND ADJUSTMENTHOW TO PLUG IN THE POWER CORDYour treadmill, like other electronic equipment, can bedamaged by sudden voltage changes in you

15CONSOLE DIAGRAMFEATURES OF THE CONSOLEThe treadmill console offers an impressive array offeatures designed to make your workouts more effec-tive and

16HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before turning on th

174. Change the incline of the treadmill as desired.To change the incline ofthe treadmill, press theIncline increase and de-crease buttons or oneof th

18HOW TO USE A PRESET WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 16.2. Select a preset workout.To select a preset

19HOW TO USE AN IFIT WORKOUTTo purchase iFit cards at any time, go to www.iFit.comor call the telephone number on the front cover of thismanual. iFit

TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20THE INFORMATION MODEThe console features an information mode that keepstrack of the total number of hours that the treadmill hasbeen used and the to

21HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the inclineto the lowest position before you fold the treadmill.Then, remove the ke

22Most treadmill problems can be solved by followingthe simple steps below. Find the symptom thatapplies, and follow the steps listed. If further assi

23Next, remove the three #8 x 3/4" Screws (1), andcarefully pivot the Motor Hood (62) off.Locate the Reed Switch (73) and the Magnet (47)on the l

24SYMPTOM: The walking belt is off-center or slipswhen walked ona. If the walking belt is off-center, first remove thekey and UNPLUG THE POWER CORD. I

25These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re

26PART LIST Model No. PFTL49611.0 R0611AKey No. Qty. Description Key No. Qty. Description1 25 #8 x 3/4" Screw24 #10 x 3/4" Screw323/8"

27Key No. Qty. Description Key No. Qty. Description101 1 Console102 1 Console Frame103 1 Left Tray104 1 Right Tray105 2 Console Clamp106 1 Console Bas

2021212832324343304530303039403636364745463644414948543960555656465859615718242318191920243030303028421842183386511028EXPLODED DRAWING A Model No. PFT

151515157418733737371111722222828697071686264767572651628283167666377797816163232323232EXPLODED DRAWING B Model No. PFTL49611.0 R0611A29

31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing

905905905969687117112735898985959292949059425263535979887101089387868382818180383811141444131399273584331111889130EXPLODED DRAWING C Model No. PFTL496

995313410310112107125229104102106111111221111111100117100105105505331EXPLODED DRAWING D Model No. PFTL49611.0 R0611A

Part No. 314533 R0611A Printed in USA © 2011 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this man

420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and press the power switchinto the off posi

5Thank you for selecting the revolutionary PROFORM®415 CT treadmill. The 415 CT treadmill offers an im-pressive selection of features designed to make

6ASSEMBLYAssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do notdispose of the packing materials u

72. See the inset drawing. Cut the plastic tie nearthe Upright Wire (87).Attach a Wheel (96) to the Base (95) with a 3/8"x 2" Bolt (8) and a

84. Hold the Right Upright (85) against the Base(95). Be careful not to pinch the Upright Wire(87). Insert two 3/8" x 4" Screws (7) and a 3/

6. Hold the Left Upright (84) against the Base (95).Insert two 3/8" x 4" Screws (7) and a 3/8" x 11/2" Screw (3) with three 3/8&qu