Pro-Form 590 LT User Manual

USER’S MANUALModel No. PFTL99909.3Serial No. Write the serial number in the space above for reference. CAUTION

108. Hold a Screw Spacer (98) inside the lower end of the Left Upright (79). Insert an M10 x 96mm Screw (7) with an M10 Star Washer (8) into the Lef

1111. Attach the Left Handrail (21) to the console assembly with three M4.2 x 19mm Screws (1). Remove the ties from the two M8 Cage Nuts (39). If n

1213. Partially tighten two M8 x 25mm Bolts (4) with two M8 Star Washers (9) into the Left Upright (79) and the Left Handrail (21); do not fully tigh

1317. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, r

14OPERATION AND ADJUSTMENTHOW TO CONNECT THE POWER CORDUse a Surge SuppressorYour treadmill, like other electronic equipment, can be damaged by sudden

15FEATURES OF THE CONSOLEThe treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. When you se

16HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before turning on t

17 The lower left display can show the elapsed time and the distance that you have walked or run during the workout. Each time you change the inclin

18HOW TO USE A PRESET WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2. Select an iFit personal traine

19THE INFORMATION MODEThe console features an information mode that keeps track of treadmill usage information and allows you to select a unit of meas

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20 HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the

21Most treadmill problems can be solved by follow-ing the simple steps below. Find the symptom that applies, and follow the steps listed. If further a

22 Remove the three M4.2 x 19mm Screws (1) and carefully pivot the Motor Hood (63) off. Locate the Reed Switch (69) and the Magnet (48) on the lef

23SYMPTOM: The walking belt is off-center or slips when walked ona. If the walking belt is off-center, first remove the key and UNPLUG THE POWER COR

24EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

25SUGGESTED STRETCHESThe correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce.1. Toe Touch Stretch

26 Key No. Qty. Description Key No. Qty. Description 1 21 M4.2 x 19mm Screw 2 5 M4.2 x 25mm Tek Screw 3 2 3/8" x 4 3/4" Scre

27 Key No. Qty. Description Key No. Qty. Description 101 1 Lift Motor Wire 102 4 Handrail Cap 103 1 Console Base 104 1 Book Holder

28222283222259222256222240414243375554536651652145150484916143746152928 603131602861291511562111527145146475727443030585847451116116EXPLODED DRAWING A

29633813813811356623243264251147167361734343667201834727012747576114777810101010656910733533246811411211114101EXPLODED DRAWING BModel No. PFTL99909.3

31. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing

30947949919494195195 9327809193293226953699932369526989292 9782869494878998971149681129081281848588138718885848611313387182EXPLODED DRAWING CModel No.

311031211023912121210510412121212139129 1121107102102102100106108109110111113EXPLODED DRAWING DModel No. PFTL99909.3 R0112A

Part No. 327613 R0112A Printed in USA © 2012 ICON IP, Inc.ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in wor

419. Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and press the power switch into the off p

5Thank you for selecting the new PROFORM® CROSSWALK 590 LT treadmill. The CROSSWALK 590 LT treadmill offers a selection of features designed to make y

6To hire an authorized service technician to assemble this product in your home, call 1-800-445-2480.Assembly requires two persons. Set the treadmill

71. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold th

83. Remove the M10 Locknut (36), the M10 x 50mm Bolt (26), and the shipping bracket (C) from the Base (99). Attach a Wheel (95) with the Bolt and th

96. Press a Base Cap (91) into the Base (99).919967. With the help of a second person, carefully tip the treadmill onto its right side. Partially