Pro-Form Quick Start 9.0 User Manual download pdf (Page 8)

8

3

. Make sure the handrail assembly is resting on

the Uprights (86). If necessary, press down gen-

t

ly on the handrail assembly in the locations

shown by the arrows.

Attach the handrail assembly to the Uprights

(

86) with two 3/8" x 1 1/4" Patch Bolts (2) and

two 3/8" Star Washers (4). Start both Patch

Bolts before tightening either of them.

2

3

2

4. Have a second person hold the Console (103)

near the handrail assembly. Connect the Upright

Wire (87) to the handrail assembly wire (A). See

the inset drawing. The connectors should

slide together easily and snap into place. If

they do not, turn one connector and try again. IF

THE CONNECTORS ARE NOT CONNECTED

PROPERLY, THE CONSOLE MAY BE DAM-

AGED WHEN YOU TURN ON THE POWER.

Make sure that the Upright Wire and the

handrail assembly wire have connectors that are

the same size.

Connect the other handrail assembly wire (B) to

the console wire (C). Insert the connectors and

the excess wire into the handrail assembly.

4

86

Handrail

Assembly

4

4

Handrail

Assembly

A

C

87

103

87

A

B

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments