Pro-Form 785SS User Manual download pdf (Page 6)

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a

small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal

condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off

the lubricant with a soft cloth and a mild, non-abrasive cleaner.

2. With the help of a second person, carefully lower the

treadmill frame and then tip the Uprights (69) down as

shown. Make sure that the Extension Legs (102) remain

in the Uprights.

Attach each Extension Leg (102) with two of the four 3/4Ó

Screws (100) as shown.

With the help of a second person, carefully tip the

Uprights (69) back to the vertical position.

Note: One replacement Base Pad (99) may be included.

Use the extra Pad if one becomes worn or needs to be re-

placed.

100

102

Frame

100

102

1. With the help of a second person, carefully raise the

treadmill to the upright position as shown at the right.

While a second person tips the treadmill to one side

and holds it, insert one of the Extension Legs (102) into

the treadmill as shown. Make sure that the Extension

Leg is turned so the Base Pad (99) is on the bottom.

Next, tip the treadmill to the other side and insert the

other Extension Leg (not shown) in the same way. Lower

the side of the treadmill so that both Extension Legs

(102) are resting flat on the floor.

102

3. There may be a plastic tie inside the post on the right

Upright (69). If there is, insert the plastic tie through a

Handrail Extension (66) and insert the Handrail Extension

into the post as shown. Make sure that the indicated holes

are on top. Tap the Handrail Extension with a rubber mallet

to fully insert it. Attach the Handrail Extension with two 1/2Ó

Screws (67) as shown.

Identify the Right Foam Grip (75), which has a large cutout

in the left side for the Pulse Bar (76). Slide the Right Foam

Grip as far as possible onto the post on the right Upright

(69). Make sure the tab on the Foam Grip inserts into the

Console Base (81). It may be helpful to use soapy water on

the Handrail Extensions (66).

Cutout

Tab

Tie

Post

Holes

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments

Pro-Form 785SS User Manual Page 6

Comments to this Manuals

Related products and manuals for Treadmills Pro-Form 785SS