Pro-Form PFTL49612.1 User Manual

Serial Number DecalModel No. PFTL49612.1Serial No. Write the serial number in the space above for reference.

107. Identify the Right Base Cover (91) and the Left Base Cover (88). Slide the Right Base Cover onto the Right Upright (85) as shown. Slide the Lef

119. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove the Screws (A) attaching the Crossbar

1210. IMPORTANT: To avoid damaging the Crossbar (104), do not use power tools and do not overtighten the #10 x 3/4" Screws (2). Orient the Cro

1313. Set the console assembly on the Left and Right Handrails (82, 83). Be careful not to pinch any wires. Insert the excess Upright Wire (87) into

1414. Hold the Right Upright Cover (86) against the console assembly. Align the holes in the Right Upright Cover with the holes in the Right Upright

15OPERATION AND ADJUSTMENTHOW TO CONNECT THE POWER CORDUse a Surge SuppressorYour treadmill, like other electronic equipment, can be damaged by sudden

16ETPF49612(PFTL49612)FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec-t

17HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem-perature before turning on t

185. Follow your progress with the display. When the manual mode is se-lected, the upper half of the display will show a track that represents 1/4

19HOW TO USE AN ONBOARD WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 17. 2. Select an onboard workout. To

2WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20HOW TO USE AN 8-WEEK WEIGHT-LOSS WORKOUT1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 17. 2. Select the desired we

21HOW TO USE THE STEREO SOUND SYSTEMTo play music or audio books through the console’s stereo speakers, you must connect your MP3 player, CD player, o

22 HOW TO FOLD THE TREADMILLTo avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the

23Most treadmill problems can be solved by follow-ing the simple steps below. Find the symptom that applies, and follow the steps listed. If further a

24 Remove the three #8 x 3/4" Screws (1) and care-fully pivot the Motor Hood (62) off. Locate the Reed Switch (73) and the Magnet (47) on the

25SYMPTOM: The walking belt is off-center or slips when walked ona. If the walking belt is off-center, rst remove the key and UNPLUG THE POWER COR

26EXERCISE GUIDELINESThese guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consu

27 Key No. Qty. Description Key No. Qty. Description 1 31 #8 x 3/4" Screw 2 4 #10 x 3/4" Screw 3 4 5/16" x 1" Scre

282021212832324343453636364745463644414948605556564657242334191920242842184218303040303058188513054103030308101039859183333EXPLODED DRAWING AModel No.

29151515157418733737371 11172222282869707168626476757265162828316766777978161663EXPLODED DRAWING BModel No. PFTL49612.1 R0712A

31. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Bef

30905905905969682735898985959292949059425263535 97988710108878683828181803838113344131327358471171114 1111889114934934EXPLODED DRAWING CModel No. PFTL

31995319310310112104121026111111221111111100105105531711116150 5229EXPLODED DRAWING DModel No. PFTL49612.1 R0712A

Part No. 330894 R0712A Printed in USA © 2012 ICON IP, Inc.To order replacement parts, please see the front cover of this manual. To help us assist yo

4movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin-ing heart rate trend

5Thank you for selecting the new PROFORM® 425 CT treadmill. The 425 CT treadmill offers an impres-sive selection of features designed to make your wor

6#8 x 1/2" Ground Screw (3)–1Base Foot Spacer (94)–2#8 x 3/4" Screw (1)–103/8" Star Washer (11)–61/4" Star Washer (34)–2#8 x 1/2&q

71. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold th

83. Identify the Right Upright (85). Hold the Right Upright near the Base (95) as shown. See the inset drawing. Tie the wire tie in the Right Upri

94. Hold the Right Upright (85) against the Base (95). Be careful not to pinch the Upright Wire (87). Insert two 3/8" x 4" Screws (7) wit