Pro-Form XT 70 User Manual download pdf (Page 10)

GPX Pro Manual5

This screen will be the screen shown during the entire race.

If this is the

first time you have raced at this track

, the device will

automatically determine that you have completed a circuit and

will start timing once it has determined the geometry of the track.

If you have

raced at this track before

, as soon as you cross the

start/finish line, the GPX will recognize the track and start timing

laps immediately.

Lap times will be “held” at the end of each screen for 20 seconds (menu adjustable).

When you slow down to under 5 mph (menu adjustable), the GPX will stop acquiring data for that

session and will ask you to name the new track you have just raced:

If you just hit Menu at this point, it will use the name suggested (NEW TRACK 1) as the track

name. If you would like to name the track otherwise, press the Left and Right arrow buttons to

cycle through letters/numbers/space. Press Select to go to the next character position, and use

the arrow buttons again. When you are done entering the track name, press Menu and you will

go back to the main screen.

NOTE: you can “back up” to the previous character position by pressing Select when a “left

arrow” shows as you’re cycling through the letters and numbers

Race again, and the whole process will start over.

Reviewing laps in Circuit Racing Mode

From the main screen, press the Left arrow to go to the first session stored in the GPX, or the

Right arrow to go to the most recently captured session. This will show a summary screen for that

session:

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 100 101

No comments

Pro-Form XT 70 User Manual Page 10