Pro-Form XT 70 User Manual download pdf (Page 58)

GPX Pro Manual53

1.10.3 Backlight

When enabled, the LCD backlight brightness can be selected from 1 (dim) to 10 (bright). Since it

uses a considerable amount of power, do not use more backlighting than necessary when running

off the internal battery. Backlighting reduces the length of time the battery will hold its charge.

Select the backlight options from the LCD display options menu:

1.10.4 Mounting

The 8 tach leds are quite bright but highly directional. If you will be using the tach lights, you will

get best visibility when the GPX is mounted so that you view it head-on, as opposed to mounting

at an angle to your view.

If you will be racing at night, you may find that the tach lights are too bright, even at the lowest

brightness setting. In this case, it is recommend that the GPX either be mounted at an angle to

your line of view to reduce the apparent brightness, or turn off the tach lights altogether.

There are 4 threaded brass inserts on the back of the GPX. These screws are metric M3 threaded.

If you mount the GPX using these brass inserts, make sure that the length of M3 screw that you

are using is not so long that it could potentially "break through" into the inside of the GPX case.

For many motorcycles, a custom anodized billet aluminum mounting bracket is available from XT

Racing at www.xtracing.com.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 100 101

No comments

Pro-Form XT 70 User Manual Page 58