Pro-Form XT 70 User Manual download pdf (Page 63)

GPX Pro 58

the GPX is in the middle of a file operation, there is a possibility

that the file system could become corrupt.

You may need to adjust the LCD contrast for optimal display under conditions of very high and

very low ambient temperatures

If you get a warning about "file system full" or "low on directory space", you need to clear out

some sessions in your GPX before continuing. If you want to save those sessions before

deleting them, connect up to GPStudio and download those sessions to your PC. After that,

using the File Maintenance menu option, select one of the delete options and delete some or

all sessions to free up some space.

When you connect the GPX to your PC, it may take a few seconds before you hear the "da-ding"

sound indicating that the GPX is properly connected. This is normal.

Occasionally when you connect the GPX to the PC, you may not get a "da-ding" sound, or you

might not get the normal "PC connected" message. In that case, disconnect the GPX, wait a few

seconds, and try again.

If an asterisk ("*") appears instead of a data value on one of the screens, that indicates that the

field is not wide enough to display the value. Go into GPStudio and make the field wider

1.13 Profiles (multiple vehicles)

You can easily use the GPX for up to 4 different vehicles and keep the settings for each vehicle

(inputs connected, calibration settings, DAQ recording rates) separate and distinct. You do this by

using profiles.

The profiles are identified by the first line of personalization. So, let's say you have a brand new

GPX and you want to use it for two bikes. Out of the box, change the personalization line 1 to, for

example, BOB GSXR1000. (The out-of-the-box personalization line 1 is "PROFILE 1".)

Connect inputs, calibrate, etc.

Now, to set it up for a second bike: go to Device mode and profiles, and select Change to another

profile. Select PROFILE 2. The GPX will reboot, and now it will "be in" PROFILE 2. Change

personalization line 1 to, for example, BOB GSXR600. Connect it to your other bike, and hook up

inputs, calibrate, etc.

You have now set up two profiles for two bikes. Whenever you switch the GPX from one bike to

the other, just go to the menu and change to the appropriate profile.

Please note that the "tracks file" (list of track names, start/finish lines, split points) is common to

all profiles. Also, when you browse through your session data, you will see all sessions, no

matter what profile it was recorded under.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 100 101

No comments

Pro-Form XT 70 User Manual Page 63