Pro-Form 380 CS User Manual download pdf (Page 6)

ASSEMBLY

ssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This is a normal condition. If there is lubricant on top of the walk-

ng belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , scissors , and rubber mallet .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to

one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.

Extra hardware may be included.

M10 Flat Washer

(14)–2

M8 x 15mm

Bolt (8)–6

M10 Star

Washer (9)–6

M8 Star

Washer (5)–6

M4.2 x 19mm

Screw (10)–6

M5 Star

Washer (7)–2

M10 x 75mm Bolt (2)–4

M10 x 60mm Bolt (1)–2

M5 x 16mm

Screw (85)–2

M4 x 10mm

Ground Screw (84)–1

#8 x 1" Tek Screw

(26)–6

M8.5 Washer

(32)–4

Extension Leg Nut

(43)–4

M8 x 58mm Bolt (13)–4

1. Make sure that the power cord is unplugged.

Position the Base (52) and the two Extension

Legs (45) upside-down as shown.

Attach six Base Pads (63) to the Base (52) and

the Extension Legs (45) with six #8 x 1" Tek

Screws (26).

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Pro-Form 380 CS User Manual Page 6

Comments to this Manuals

Related products and manuals for Treadmills Pro-Form 380 CS