Pro-Form 380 CS User Manual download pdf (Page 11)

1111

14. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys

in a secure place. One hex key is used to adjust the walking belt (see page 20). To protect the floor or carpet,

place a mat under the treadmill.

13. Attach the Latch Housing (48) to the Left

Upright (53) with two M4.2 x 19mm Screws (10);

start both Screws before tightening either of

them. Make sure that the large hole in the

Latch Housing is on the indicated side.

Locate the Latch Pin Assembly (24). Remove

the knob from the pin. Make sure that the collar

and the spring are on the pin. (Note: If there are

two collars, place one on each side of the

spring.) Insert the pin into the Latch Housing

(48). Then, tighten the knob onto the pin.

Spring

Collar

Knob

Large Hole

12. See the lower drawing. Position the Uprights

(53, 54) so that the Frame (51) is centered be-

tween them.

See the upper drawing. Firmly tighten the two

10 x 60mm Bolts (1) and the four M10 x

75mm Bolts (2). Be careful not to overtighten

the M10 x 60mm Bolts.

Top View

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Pro-Form 380 CS User Manual Page 11